What is the proper way for charging the Torch battery?

It is very important to make sure that the three position side switch is not blinking red as the Torch is being charged.
If the three position side switch is blinking red you need to unplug the charger and click the end cap switch once as the Torch will not charge correctly otherwise.
Check to see that under the switch end cap, you have the battery connector firmly seated and connected correctly.
Be sure to have charged the Torch for a minimum of 3.5 to 4 hours.
Check to make sure that the two red LEDs next to the plug under the rubber cover are lit up while the Torch is charging.
The two LEDs, one on each side of the plug will start out red and then turn green.
Make sure that you charged the Torch long enough to have the two LEDs change from red to green.

Have more questions? Submit a request


Article is closed for comments.