Never shine the lasers on people or animals.
Laser shows look best when seen from a safe distance, and should be installed 3 meters above the floor wherever people may be present.
One way to make sure laser beams don't shine on people is to use the beam blocker.
Raise it up and tighten it down to cut off the lower projections.
There's a tripod mount at the bottom of the cube, so you can make sure it's securely fastened during use.
Safety zones can be set up in LaserOS which provide areas where the beam won't shine in order to protect cameras and other sensitive equipment. For information on setting up and using safety zones, please refer to the Safety Zones section in the Settings Mode of LaserOS.
Do not operate near flammable materials, and always have a fire extinguisher available.
Other safety measures on the laser cube include a jumper and a lock. Both must be installed properly in order for the lasercube to function. When the lasercube is not in use, turn off the power and safety keys, and close the beam blocker completely.
Remember to review the Wicked Lasers Safey Video!