In WiFi Client mode, the Cube can be made to connect to a router using WPS.
After selecting WiFi client mode, the LaserCube will reboot and the status LED will be off.
A short press on the Mode Button will confirm Client mode has been selected and will display IP:Not Connected.
Hold the Mode Button in for 5 seconds (after 2, the status LED will begin flashing blue, but continue holding until the Status LED turns White. This indicates the Cube is in WPS mode.
Press the WPS button on your router.
If connected successfully, the Status LED will turn solid blue.
A Short press on the Mode Button will project the WiFi Client status, including IP address obtained from the router, plus the SSID of the network it had connected to via WPS.
Here, the IP address provided from the router is 18.104.22.168.
If you want to access the LaserCube web admin page, you need to use this address, rather than the default 192.168.1.1 when in WiFi Server mode.