The mode can be selected via use of the Mode Button, or through the LaserCube web admin - General Tab.
Having Enabled the Laser (Two white LEDs on) a brief press on the Mode Button will cause the laser to project a line of text, displaying the current mode and status.
A long press (over 2 seconds) will enable the mode menu.
An asterisk will be projected in front of the current mode.
Subsequent short presses will cycle through the list of available modes:
Wifi Server - Status LED flashing Cyan.
LAN Client - Status LED flashing Green.
WiFi Client - Status LED flashing Blue.
LAN Server - Status LED flashing Yellow.
A long press (over 2 seconds) will select the mode currently shown. If not the same as the current mode, the LaserCube will briefly reboot, in order to change the networking mode.